-
Classifications :ARF Easy Gouging
-
Recommendations :Where Chamfering, grooving or gouging is necessary, Without supplementry and extensive equipment, for perparing sections prior to welding, gouging out old or defective weld metal, removing flash and risers. ldeal to remove most unwanted metal prior to final machining. For ferrous or non ferrous metals. A highly heat electrode whose special exothermic coating concentrates the force of the arc right at the point of application.
-
Procedure :Hold ferron Gouge electrode into a conventional electrode holder. Use ac or dc reverse polarity. No special equipments needed. Point electrode, like a lance, in direction of travel, at an angle of not more then 30' with the plane of the work. Strike arc. Delayed action start permits placing end of the Ferron-Gouge at the exact starting point. Push electrode along the line of cut, quickly for a Shallow chamber, more slowly or with a weaving motion, fore a deeper gouge, utillzing the heat and force of the highly concentrated arc, push the molten metal ahead and away. If deeper gouge is needed, repeat procedure until the required depth has been achieved.
-
Applictions :Gouge cast iron, other metals. Removal of old weld and rivets
-
Outstanding Features :No oxygen, other gas or special electorde
Exothermic coating concentrates arc force Further finishing not necessary.
Precautions :
Preheat Electrodes at 100'C-110'C temperature prior to use for best result holder.
| SIZE | LENGHT | RANGE | Wt./PKT.(kg) | Wt./Box(Kg) |
|---|---|---|---|---|
| 3.15 | 450 | 150-180 | 4 | 16 |
| 4.00 | 450 | 200-220 | 4 | 16 |
| 5.00 | 450 | 250-300 | 4 | 16 |